5 Tips for quality pro with your portable audio recorder records

1. Start with a professional digital audio recorder. These expenses of it does not mean you have thousands of dollars, but can't wait to get good results dictated consignateur toy handheld. Your recorder must, at a minimum, complete record frequency (20 Hz - 20 kHz) spectrum, use file formats and popular media and have good quality microphones and preamplifiers.

2. Registered the highest possible quality. The settings available depend on what digital audio recorder you use, but must try to burn WAV uncompressed in the highest bit rate files available. This must be at least 16 bit/48 kHz and 24 bit/96 kHz for better than CD quality until eventually. Record high definition will use your recorder uses more space to the SD card or any storage format, but you can always remove unwanted files. If it begins with high-quality recording, can compress and edit the files to convert to MP3, download Internet later or save space on your hard disk. But you can ' increase quality, once it has been registered, so start with the highest quality.

3. Using high-quality microphones. Most of the portable digital recorder classified have very good microphones built into the recorder. These built-in microphones are more suitable for most recording applications. If you have a burner that you like, but the built-in microphones are not the best sound, check to see if there are connectors microphone to use external microphone. You can rent or buy a professional microphone input for once when you need to sound quality. You can also use these jacks for microphone input to connect a microphone or a lavalier microphone if you register for video production.

4. Defines levels of records correctly. You should always check input levels before starting record. If you save music, speech, nature or any which is the source of the sound, look at the recording level meter and adjust input t levels too high not mobile registration or too quiet. If the logging level is too low, the noise signal is high and spoken out loud in your registration. If the logging level is too high, the sound go straight microphone Preamplifiers and hear distortion in your record. Attempts to set the record level that gives you the highest level without counter never goes in the Red or the zero mark. Just a zero in a digital record causes the distortion and unusable audio recording.

5. Don ' t get fancy. Incorporated some portable digital recorder have effects and other features that can be used for older record sound. It is usually best recording "SCE" or without any effect. If you register with the highest quality possible, you can always change your records and add compression, eq, reverb, or what you want to use later. But if the effects are applied when recording, you can ' t - do the effect. It is therefore preferable to save dry and add effects later if necessary.